0An Fi So

5V 2*18650 Lithium Battery Charging UPS Uninterrupted Protection Integrated Board Boost Module With Battery Holder

4.7

★★★★★

$16.99 /$20.73

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$2.50 /$20.73

Saya Yanzu Ƙara zuwa Cart

Katin Kiredit ko Debit

Tabbacin Biyan Kuɗi lafiya

Kyauta Kyauta

Kyauta kyauta tare da kowane siyayya

Manufar Jigilar Kaya

Jigilar kaya kyauta akan odar sama da $9.9

Manufar Komawa

Ana karɓar abubuwan da aka dawo da su cikin kwanaki 40 tun ranar karɓar kayan. Ba za a iya mayar da abubuwan da aka keɓance ba. Abubuwan da aka saya tare da katin kyauta ana iya musayar su kawai.

Kyauta Kyauta

Barka da zuwa Roymall, shafinku na siyan kyaututtuka masu inganci. Muna girmama goyon bayanku, kuma muna ba da kyauta kyauta tare da kowane siyayya. Shirya don bincika tarinmu kuma ku sami kyaututtukanku masu dacewa.

Manufar Jigilar Kaya

Za mu aika kayanku cikin kwanaki 2 bayan siyayya.Lokacin jigilar kaya yawanci kwanaki 5-7 ne.Saboda jigilar mu ta duniya ne, lokacin jigilar zai dogara da wurin ku.

1. Manufar Komawa

Muna karɓar abubuwan da aka saya daga roymall.com kawai. Ba za a iya mayar da kyauta kyauta ba. Dole ne abu ya kasance ba a yi amfani da shi ba kuma a cikin yanayin da kuka karɓa.Za mu sarrafa komawar ku cikin kwanaki 3-5 bayan karɓa.Ba za a iya mayar da abubuwan da aka keɓance ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +8619359849471

2.Manufar Maida Kuɗi

Za ku sami cikakken maida kuɗi bayan mu karɓi abubuwan da aka dawo. Kuɗin jigilar kaya ba za a iya mayar da su ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +8619359849471

ntFeature:

nt1. Boost + charge control + Lithium battery protection + UPS uninterrupted power supply, multi-function integration, easy to use, no longer trouble the intricate flying lines between the various function boards.

nt2. The switch can be used as a low power DC mobile power supply. It can be used as a UPS power supply and can be used as a lithium battery charger.

nt3. Battery box design, easy to remove and replace the battery.

nt4. Separate charge port, wiring can be placed in any position.

ntAdvantage:

ntThe power supply charges the battery one way while the other way turns on the boost output.

ntWhen the power supply is turned on, the battery can be removed at will.

ntWhen the battery is powered, the power supply can also be disconnected at any time.

ntIf the power supply or the battery is powered at any way, it can be keep the load continuously and continuously work (UPS function).

ntWhen the UPS function is not used, charging the battery can also be used as an ordinary portable power source.

ntThe charging power supply is connected so that the load operation does not occupy the charging current of the battery. The power supply can rapidly charge the battery while being loaded.

ntNote:

ntCharging 3/4 pin should be connected to DC5V charging, charging current 500mA max, requires that the maximum power of the charging power supply used is at least 3W higher than the load power consumption, that is, the power supply can also have enough current to the battery while carrying charging.

ntFor example: If the load is ≤ 2W, 5V1A charging power supply can be used.

ntThe SW switch pin can be connected in series to control the boost output circuit to turn on and off. If the switch function is not required, please short connect the SW pin to make the boost path normally open.

ntOutput positive and negative poles 5/6 pin to connect the load, the load normal state recommends ≤ 5W, transient ≤ 8W.

ntwhen 5V output, normal load current recommend ≤ 1A, when output 6V ≤800mA, output 9V ≤500mA, output 12V ≤400mA

ntLithium battery overcharge protection, over discharge protection, current limiting protection, over temperature protection, output short circuit protection. (If short-circuited due to the fault operation, enter the protection state will not be output, and the connection with 5V charging will automatically activate the reoutput.

ntPrecautions:

ntThere are mos and other components on the board, which can be easily damaged by the soldering iron or by static electricity. Make sure that the soldering iron used is grounded (and the grounding wire is conductive). It is best to wear anti-static gloves.

ntPackage includes:

nt1 x 18650 Lithium Battery Boost Module (the battery does not includes)

n
n
n

Siya ta Paypal