Eachine TX805 5.8G 40CH 25mW 200mW 600mW 800mW FPV Transmitter TX LED Display Support OSD Pitmode Smart Audio
85
Direct purchase from the factory 
Tabbacin Biyan Kuɗi lafiya
Kyauta Kyauta
Manufar Jigilar Kaya
Manufar KomawaKyauta Kyauta
Barka da zuwa Roymall, shafinku na siyan kyaututtuka masu inganci. Muna girmama goyon bayanku, kuma muna ba da kyauta kyauta tare da kowane siyayya. Shirya don bincika tarinmu kuma ku sami kyaututtukanku masu dacewa.Manufar Jigilar Kaya
Za mu aika kayanku cikin kwanaki 2 bayan siyayya.Lokacin jigilar kaya yawanci kwanaki 5-7 ne.Saboda jigilar mu ta duniya ne, lokacin jigilar zai dogara da wurin ku.1. Manufar Komawa
Muna karɓar abubuwan da aka saya daga roymall.com kawai. Ba za a iya mayar da kyauta kyauta ba. Dole ne abu ya kasance ba a yi amfani da shi ba kuma a cikin yanayin da kuka karɓa.Za mu sarrafa komawar ku cikin kwanaki 3-5 bayan karɓa.Ba za a iya mayar da abubuwan da aka keɓance ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +86193598494712.Manufar Maida Kuɗi
Za ku sami cikakken maida kuɗi bayan mu karɓi abubuwan da aka dawo. Kuɗin jigilar kaya ba za a iya mayar da su ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +8619359849471
Specification of VTX:
Package included:1 x Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter VTX 1 x Adapter connector cable (RP-SMA or SMA Female)1 x MMCX Pigtail Antenna
| Brand Name: | Eachine |
| Model: | TX805 |
| Item Name: | FPV Transmitter VTX |
| Frequency: | 5.8G |
| Channels: | 40CH |
| Input Voltag: | 7V~24V |
| 5V Camera Supply: | 120mA(MAX)----25mW@12V 200mA(MAX)----200mW@12V 300mA(MAX)----600mW@12V 350mA(MAX)----800mW@12V |
| Extra Features: | Smart audio |
| Power Supply: | 5V output for Camera |
| Output Power: | 25mW/200mW/600mW/800mW switchable |
| Antenna Connector: | MMCX |
| Cable Connector: | Solder pads |
| Dimensions: | 36mm*22mm*5mm, 30.5 Stackable Hole |
| Weight: | 8g(Excluding Antenna) |
Features:
1. Pitmode
2. Support Smart audio
3. 40 channels with MIC
4. Power failure memory
5. 25/200/600/800mw power switchable6. Support OSD Configuring via Betaflight FC7. One button frequency and power setup
8. 7-24V wide input voltag with 5V for camera,12V typical corresponding current value:
25mw-120mA 200mw-200mA 600mw-300mA 800mw-350mA9. Solid MMCX antenna connection and MMCX brass dipole antenna
Button control Channel select mode
Channel select
Select channels by simple short presses.
Blue LED light on stands for CH1, short presses to change 8 channels sequentially.
For CH2/ 3/ 4/ 5/ 6/ 7/ 8, Blue LED flicker once, it won"t light on.
Notice: Blue LED only light on for CH1
Band select
Press button for 2S, Red LED will flash, then short presses to select 5 bands.
Power select
Press button for 4S, Red LED will flash, then select power by simple short presses to select 25mW/ 200mW/ 600mW sequentially, For 200mW, Green LED flicker once, it won"t light on; For 600mW Blue LED flicker once, it won"t light on. Press the button again, Red LED, Green LED and Blue LED lights together, Represents the highest power 800mW.
Notice: Red LED only light on for 25mW.
Pit Mode(0.01mW)
While in Pit Mode you can change channels and sett power levels, but none of these changes will take effect until you quit Pit Mode. By default, Pit Mode will send a very weak signal.
Two ways to exit pit mode:
Press button 12S until all 16 LED turned off and light on again to exit pit mode,or you can exit pit mode via Betaflight OSD.
Notice: The VTX has memory for settings, To change the settings, please repeat steps as above.
Package included:1 x Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter VTX 1 x Adapter connector cable (RP-SMA or SMA Female)1 x MMCX Pigtail Antenna
1 x Instructions
Toys Hobbies & Robot Ranking
n
n
n
n
n
