HSKRC MAK4 7 Inch 295mm Carbon Fiber Frame Kit 5mm Arm Thickness for DIY Long Range RC FPV Racing Drone
Direct purchase from the factory 
Tabbacin Biyan Kuɗi lafiya
Kyauta Kyauta
Manufar Jigilar Kaya
Manufar KomawaKyauta Kyauta
Barka da zuwa Roymall, shafinku na siyan kyaututtuka masu inganci. Muna girmama goyon bayanku, kuma muna ba da kyauta kyauta tare da kowane siyayya. Shirya don bincika tarinmu kuma ku sami kyaututtukanku masu dacewa.Manufar Jigilar Kaya
Za mu aika kayanku cikin kwanaki 2 bayan siyayya.Lokacin jigilar kaya yawanci kwanaki 5-7 ne.Saboda jigilar mu ta duniya ne, lokacin jigilar zai dogara da wurin ku.1. Manufar Komawa
Muna karɓar abubuwan da aka saya daga roymall.com kawai. Ba za a iya mayar da kyauta kyauta ba. Dole ne abu ya kasance ba a yi amfani da shi ba kuma a cikin yanayin da kuka karɓa.Za mu sarrafa komawar ku cikin kwanaki 3-5 bayan karɓa.Ba za a iya mayar da abubuwan da aka keɓance ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +86193598494712.Manufar Maida Kuɗi
Za ku sami cikakken maida kuɗi bayan mu karɓi abubuwan da aka dawo. Kuɗin jigilar kaya ba za a iya mayar da su ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +8619359849471Specifications:
Brand name: HSKRC
Model: MAK4
Item name: 295mm wheelbase Carbon Fiber Frame Kit
Color: Red/Grey/Blue
Wheelbase:295mm
Arm thickness: 5MM
Upper center board: 2.5MM
Lower center plate: 2.5MM
Camera Mount Width: 19mm
Camera protection frame board thickness: 2MM
Plywood thickness: 2MM
Size: 193*223MM
weight: about 128g
Recommended configuration(not included):
Flight control: 20x20mm 30.5x30.5mm F4/F405/F722
Motor:2306/2806.5/2806
ESC: 35A-60A Split/4-in-1
Battery: 4S 1800mAh ~ 6S 2200mAh
Propeller: supports up to 7 inches (7040)
GPS: BN220 (22x20x6mm)
The following Parts are compatible:( NOT Included)
Features:
-Flight is smooth and FPV shooting is easier and more elegant.
-H-shaped structure does not affect the flying experience at all. On the contrary, compared with the X-shaped structure, the arm is shorter and lighter. At the same time, the arm strength is higher.
-The H-shaped layout has more installation space in the middle section of the cabin and a lower center of gravity, making the flight more stable.
-The installation size of the FPV lens is 19mm wide
-Flight control installation positions with two hole spacings of 30.5*30.5 and 20*20 are reserved at the front and rear of the cabin. Suitable for the installation of a variety of flight control equipment.
-Fixed motor mounting hole spacing: 16*16/16*19/19*19mm are compatible.
-The corners of the entire machine are chamfered to create a fine workmanship and reasonable structure. Of course, there are also customized thickened aluminum tubes to ensure the strength of the frame.
Package Included:
1x Frame Kit
1x Set of 3D Printed Parts
