Upgrade 2.4GHz Wireless Development Ubertooth One bluetooth-compatible Analysis Device Supports BLE
59
Direct purchase from the factory 
Tabbacin Biyan Kuɗi lafiya
Kyauta Kyauta
Manufar Jigilar Kaya
Manufar KomawaKyauta Kyauta
Barka da zuwa Roymall, shafinku na siyan kyaututtuka masu inganci. Muna girmama goyon bayanku, kuma muna ba da kyauta kyauta tare da kowane siyayya. Shirya don bincika tarinmu kuma ku sami kyaututtukanku masu dacewa.Manufar Jigilar Kaya
Za mu aika kayanku cikin kwanaki 2 bayan siyayya.Lokacin jigilar kaya yawanci kwanaki 5-7 ne.Saboda jigilar mu ta duniya ne, lokacin jigilar zai dogara da wurin ku.1. Manufar Komawa
Muna karɓar abubuwan da aka saya daga roymall.com kawai. Ba za a iya mayar da kyauta kyauta ba. Dole ne abu ya kasance ba a yi amfani da shi ba kuma a cikin yanayin da kuka karɓa.Za mu sarrafa komawar ku cikin kwanaki 3-5 bayan karɓa.Ba za a iya mayar da abubuwan da aka keɓance ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +86193598494712.Manufar Maida Kuɗi
Za ku sami cikakken maida kuɗi bayan mu karɓi abubuwan da aka dawo. Kuɗin jigilar kaya ba za a iya mayar da su ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +8619359849471
Description:
The upgraded version adopts the latest firmware Uber Tooth-2020-12-R1 Uber Tooth One is an open source 2.4 GHZ wireless development platform, which is suitable for bluetooth experiments. Based on the powerful LPC175XARM CORTEX-M3 microcontroller and full-speed USB 2.0, UBERTOOTH ONE is a good way to develop and customize Class 1 comparable bluetooth devices. The difference between UBERTOOTH and other bluetooth development platforms is that it can not only send and receive 2.4GHZ signals, but also run in monitoring mode to monitor bluetooth traffic in real time. This working mode has existed in low-cost WIFI module for many years, and has been applied in research, development and security audit countless times, but until now, there is no such solution in bluetooth standard. In addition, because it is a completely open source platform (software and hardware), the schematic diagram and code can meet all your needs at any time.
Features:
1. 2.4 GHz transmission and reception.
2. The transmitting power and receiving sensitivity are comparable to those of Class 1 bluetooth devices.
3. Standard Cortex debugging connector (10-pin 50-mil JTAG)
4. In-system programming (ISP) serial connector
5. An expansion connector designed for Ubertooth communication or other future uses.
6. Six indicator lights
7. Attached with 2.4 GHz antenna
Package Include:
1x Module Board
1x 2.4GHz Antenna
The upgraded version adopts the latest firmware Uber Tooth-2020-12-R1 Uber Tooth One is an open source 2.4 GHZ wireless development platform, which is suitable for bluetooth experiments. Based on the powerful LPC175XARM CORTEX-M3 microcontroller and full-speed USB 2.0, UBERTOOTH ONE is a good way to develop and customize Class 1 comparable bluetooth devices. The difference between UBERTOOTH and other bluetooth development platforms is that it can not only send and receive 2.4GHZ signals, but also run in monitoring mode to monitor bluetooth traffic in real time. This working mode has existed in low-cost WIFI module for many years, and has been applied in research, development and security audit countless times, but until now, there is no such solution in bluetooth standard. In addition, because it is a completely open source platform (software and hardware), the schematic diagram and code can meet all your needs at any time.
Features:
1. 2.4 GHz transmission and reception.
2. The transmitting power and receiving sensitivity are comparable to those of Class 1 bluetooth devices.
3. Standard Cortex debugging connector (10-pin 50-mil JTAG)
4. In-system programming (ISP) serial connector
5. An expansion connector designed for Ubertooth communication or other future uses.
6. Six indicator lights
7. Attached with 2.4 GHz antenna
Package Include:
1x Module Board
1x 2.4GHz Antenna
Electronics Ranking
